Replacing The Device; Spare Parts/Accessories; Ordering Of Spare Parts - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Service and maintenance

9.6 Spare parts/Accessories

Service information parameters
The basic service information parameters are:
• Driver Current
• Pickup 1 Amplitude
• Pickup 2 Amplitude
• Sensor Frequency
• Process Media Temperature
• Zero Point Adjustment Auto/Manual
• Zero Point Offset Value
• Manual Zero Point
• Zero Point Standard Deviation
9.5

Replacing the device

Corrosive substances
Risk of chemical burns when replacing the sensor.
The sensor in the device contains corrosive substances that result in burns on unprotected skin.
• Make sure that the sensor enclosure is not damaged when replacing the sensor.
• If contact with the corrosive substances occurs, rinse the affected skin immediately with
9.6 Spare parts/Accessories
9.6.1

Ordering of spare parts

Ensure that your ordering data is not outdated. The latest ordering data is always available on
the Internet: Catalog process instrumentation
processinstrumentation/catalogs)
90
CAUTION
large amount of water to dilute substance.
(http://www.siemens.com/
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB