Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual page 89

The device is then restarted and is in the selected operating mode.
Note
Once you have initialized the SCALANCE X204RNA EEC (PRP/HSR) using the CLI, the CLI
command "setmode [PRP|HSR]" is no longer displayed.
After initializing
After you have initialized the SCALANCE X204RNA (PRP/HSR) and restarted the device, the
corresponding dialog box is displayed in WBM:
Figure 9-3
Figure 9-4
SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07
Functional description and configuration using Web Based Management
SCALANCE X204RNA EEC (PRP/HSR) in "PRP" mode
SCALANCE X204RNA EEC (PRP/HSR) in "HSR" mode
9.4 Initializing the SCALANCE X204RNA EEC (PRP/HSR)
89