Sfp Interface - Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual

Device description
5.6 SCALANCE X204RNA EEC interfaces
5.6.2

SFP interface

NOTICE
Failure of the data traffic due to contamination of optical plug-in connections
Optical sockets and plugs are sensitive to contamination of the end face. Contamination can
lead to the failure of the optical transmission network. Take the following precautions to avoid
functional impairments:
• Clean the end face of field-assembled connectors carefully before connecting. No residues
• Only remove the dust caps of optical transceivers and pre-configured cables shortly before
• Close unused optical sockets and plugs as well as pluggable transceivers and slots with the
Transmission medium and range
Note
The SFP slots are intended for SFP transceivers with optical interface. SFP inserts with electrical
interface (RJ45) are not supported.
Table 5-4 SFP transceiver - overview
SFP transceiver
Transmission medium
• Wavelength
• Core diameter
• Outer diameter
Maximum range
Order number
Note
The SFP modules do not ship with the product and must be ordered separately, if needed.
Connectors
• Electrical connection: SFP slot
• Optical connection: Duplex LC connector
44
of processing may remain on the connector.
connecting the cables.
supplied protective caps.
SFP991-1
Multimode FO cable
1310 nm
50 or 62.5 µm
125 µm
3 km
6GK5991-1AD00-8AA0
SFP991-1LD
Monomode FO cable
1310 nm
9 µm
125 µm
26 km
6GK5991-1AF00-8AA0
Operating Instructions, 04/2022, C79000-G8976-C342-07
SFP991-1LH+
Monomode FO cable
1310 nm
9 µm
125 µm
70 km
6GK5991-1AE00-8AA0
SCALANCE X-200RNA