Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual page 29

Setting for device
Redundant HSR PRP coupling, LAN B (The port P1/A is open and must not be used.)
Configuration of the "NetID" parameter
The network ID of the PRP network is specified with this parameter. The valid range of values is
1 to 6. The devices SCALANCE X204RNA
therefore need to set the same value for the NetID parameter for both devices. The same applies
to the devices SCALANCE X204RNA
different PRP network and for this reason a different NetID from the devices
used. For example NetID "5" could be assigned for devices
and
SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07
② ④
and
④
.
Network topologies and redundancy
① ②
and belong to the same PRP network and you
③ ④
and . The last devices named belong however to a
①
4.3 HSR-PRP coupling
① ②
and
②
und and NetID "6" for devices
must be
③
29