Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual page 65

Uninstalling
To remove devices from the DIN rail, follow the steps below:
1. First disconnect all connected cables.
2. Release the DIN rail catch on the bottom of the device using a screwdriver.
3. Then pull the lower part of the device away from the DIN rail.
Figure 6-3
SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07
Removing from a 35 mm DIN rail based on the example of the SCALANCE X204RNA
Installation and disassembly
6.5 Mounting on DIN rails
65