Network topologies and redundancy
4.3 HSR-PRP coupling
4.3.2
Coupling of two PRP networks via an HSR ring
Figure 4-5
Settings in WBM
You specify the functionality of the devices SCALANCE X204RNA
coupling of the two PRP networks on the WBM page X200 > Coupling Configuration. You need
to configure the following parameters:
• Coupling Mode
• NetID
Configuration of the "Coupling Mode" parameter
Setting for device
Redundant HSR PRP coupling, LAN A (The port P2/B is open and must not be used.)
28
Topology of a coupling of two PRP networks via an HSR ring
①
③
and
①
to
Operating Instructions, 04/2022, C79000-G8976-C342-07
④
relating to the
SCALANCE X-200RNA