Table of Contents
Advertisement
Approvals
The markings of the electrical devices are:
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.8
• EN IEC/IEC 60079-0, GB 3836.1
You will find the current versions of the standards in the currently valid certificates.
Note
Only variants with 24 VDC power supply meet the requirements of this approval.
Note for devices with CLASS 1 LASER
Important note on products certified according to Type Examination Certificate KEMA
07ATEX0145 X as of Issue 95 / DEKRA 18ATEX0025 X and IECEx Certificate of Conformity DEK
14.0025X as of Issue 43 / DEK 18.0017X and containing Class 1 optical radiation sources.
Note
CLASS 1 LASER
The device contains optical radiation sources which comply with the limits of Class 1 according
to IEC 60825-1. Fiber-optic cables connected to these optical radiation sources may therefore be
routed either to or through hazardous areas requiring Category 2G, 3G, 2D or 3D equipment.
Safety of electrical equipment (Low Voltage Directive)
The EEC device variants also meet the requirements of the EU Directive 2014/35/EU "Low Voltage
Directive".
166
II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0025 X
DEKRA 21UKEX0001 X
IECEx DEK 18.0017X
Importer UK:
Siemens plc,
Manchester
M20 2UR
(Ex na IIC T4 Gc, not on the nameplate)
2020322310002626
2020322310002915
2020322310002987
Operating Instructions, 04/2022, C79000-G8976-C342-07
SCALANCE X-200RNA
Advertisement
Table of Contents
