Table of Contents
Advertisement
13 MASK, FENDER
13.1
102
Removing front fender
front fender
Preparatory work
-
Switch off all the power consumers and the engine.
-
Remove the headlight mask with the headlight.
Main work
-
Disconnect plug-in connectors
8.
Remove screws
-
Take the brake line and wiring harness out of the brake line
guide.
-
Remove screws (s) . Take off the fender.
Main work
-
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
-
Position the brake line and wiring harness in the brake line
guide.
Mount and tighten screws
Guideline
Remaining screws,
chassis
-
Connect plug-in connectors (s) of the turn signals.
Finishing work
-
Install the headlight mask with the headlight.
-
Check the headlight setting.
(a
p. 103)
O
of the turn signals.
0-
M6
10 Nm (7.4 lbf ft)
8.
M6
10 Nm (7.4 lbf ft)
(a
p. 103)
(a
p. 148)
Advertisement
Table of Contents
