Introduction to Using Scanner Functions
Introduction to Using Scanner Functions
The necessary settings before sending scanned documents to a shared folder (file server),
or scanning documents from a computer are as follows.
For Scanning Documents to a Shared Folder (File Server)
●
Network Settngs
Connect the network cable and set the IP address to enable your machine to communicate over the network.
For details, see "Network Settings, " in the e-Manual.
●
Shared Folder (Fle Server) Settngs
Check the required information and set up the machine and computer to enable you to send scanned
documents to a shared folder. For details, see "Network Settings, " in the e-Manual.
For Scanning Documents from a Networked Computer
●
TWAIN-complant Applcatons
Color Network ScanGear is launched from the menu of a TWAIN-compliant application (applications capable
of modifying images or inserting them into a document, such as Adobe Photoshop, Microsoft Office, etc.). A
TWAIN-compliant application must be installed in your computer, since Color Network ScanGear cannot be
used as an independent application software.
●
Network Settngs
Connect the network cable and set the IP address to enable your machine to communicate over the network.
For details, see "Network Settings, " in the e-Manual.
If you want to use the machine as a network scanner, it must be connected to a computer over an IPv4 network.
●
Color Network ScanGear
Color Network ScanGear is an application software required in order to scan documents from a computer. For
information on how to install the software, see "Set Up Computers and Software, " in the Starter Guide.
If Color Network ScanGear is already installed, select the [start] (or [Start]) menu on the computer, then [Program](or [All Programs]). The
[Color Network ScanGear] folder is displayed.
8-4