Basic Methods For Sending I-Faxes - Canon Color imageCLASS MF9220Cdn Basic Operation Manual

Basic Methods for Sending I-Faxes

This section describes the flow of sending I-faxes.
– The following conditions are always selected:
• Paper Size: LTR
This is because the sender does not know whether the recipient's machine can receive sizes other than LTR. Originals larger than LTR
are reduced to LTR size.
• File Format: TIFF
• Resolution: B&W 200 × 100 dpi or B&W 200 × 200 dpi
– For details on the I-fax functions, see "Fax, " in the e-Manual.
1
Place your originals.
2
Press (Main Menu).
3
Use [▼], [▲] or
<Send/Fax>, then press [OK].
(Scroll Wheel) to select
4
Use [▼], [▲] or
<Enter I-Fax (New)>, then press [OK].
5
Use the software keyboard to enter the I-
fax address, then press the right Any key
to select <Set>.
– You can enter up to 120 characters for the I-
fax address.
– For information on using the software
keyboard, see "Entering Characters, " on p. 1-19.
Sending Fax Documents
(Scroll Wheel) to select
5-25