Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1
Place originals on the platen glass or load
it them in the feeder.
–
For details, see "Placing Originals, " on p. 2-4.
–
Close the feeder after placing your originals.
–
For originals you can copy, see "Originals
Requirements, " on p. 2-2.
–
When the display shows the message <Enter
the Dept. ID and password using the numeric
keys.>, enter the department ID and
password. Then press
control panel. For details, see "Security" in the
e-Manual.
•
When <Allow Black Copy Jobs> in <System
Management Set.> from the Additional
Functions screen is set to <On>, you can
make black and white copies without
entering <Dept. ID> and <Password>. (For
details, see "Accepting B&W Copy Jobs
without Entering the Department ID and
Password, " in the e-Manual.) To make black
and white copies, press the right Any key to
select <Black Copy>.
–
When the display shows the message <Enter
User ID and password.>, enter the user ID and
password. Then press
control panel. For details, see "Security" in the
e-Manual.
4-4
(Log In/Out) on the
(Log In/Out) on the
2
Press
(Main Menu).
3
Use [▼], [▲] or
<Copy>, then press [OK].
4
Make the copy settings you require.
You can specify the following settings:
–
<Color Mode Settings>: Specifies the color or
B&W. (See "Selecting Color Mode, " on p. 4-7.)
–
<Paper Source Settings>: Specifies the paper
source. (See "Selecting Paper Source, " on
p. 4-9.)
–
<Density/Background Rem. Set.>: Adjusts the
density and the background color of originals.
(See "Adjusting Density, " on p. 4-19.)
–
<Various 2-Sided Settings>: Makes two-sided
copies. (See "2-Sided Copying, " on p. 4-23.)
–
<Copy Ratio Settings>: Adjusts the size by
enlarging/reducing original images. (See
"Enlarge/Reduce Images, " on p. 4-31.)
–
<Original Image Quality Settings>: Specifies
the image type of originals. (See "Selecting
Image Quality, " on p. 4-35.)
(Scroll Wheel) to select