Using Stack Bypass Tray With Standard Paper Sizes - Canon Color imageCLASS MF9220Cdn Basic Operation Manual

Using Stack Bypass Tray with Standard Paper Sizes

This section describes how to copy onto standard-sized paper using the stack bypass tray.
If <Stack Bypass Paper (Std.)> setting in <Paper Settings> from the Additional Functions screen is set to <Off>, the paper size/type
setting screen appears when you load paper in the stack bypass tray. If <Stack Bypass Paper (Std.)> is set to <On>, copying can be
performed only for the registered paper size and type. (See "Setting Paper Size and Type, " on p. 2-22.)
1
Set originals.
For details, see "Placing Originals, " on p. 2-4.
2
Press (Main Menu).
3
Use [▼], [▲] or
<Copy>, then press [OK].
(Scroll Wheel) to select
4
Load the paper into the stack bypass tray.
5
Use [▼], [▲] or
the desired paper size, then press [OK].
You can select from the following paper sizes:
<LTR>, <LGL>, <STMT>, <EXEC>, <FLSC>,
<OFI>, <B-OFI>, <M-OFI>, <G-LTR>, <G-LGL>
For details, see "Paper Requirements, " on p. 2-7.
The available paper sizes will vary depending on
the country where the unit was purchased.
Selecting Paper Source
(Scroll Wheel) to select
4-11