Using The One-Touch - Canon Color imageCLASS MF9220Cdn Basic Operation Manual

Specifying Destinations

Using the One-Touch

You can specify up to 200 destinations in one-touch.
Follow the procedure below to start a transmission and send a document using one-touch.
– To use this feature, you must first register destinations in one-touch. (See "Registering Fax Numbers in One-Touch, " on p. 3-32.)
– If you use the Color imageCLASS MF9220Cdn, you can register only one-touch destinations in the Address Book.
– For details on how to send the documents, see "Basic Methods for Sending Faxes, " on p. 5-17.
1
Press
2
Use [▼], [▲] or
<Send/Fax>, then press [OK].
3
Press the right Any key to select <One-
touch>.
5-36
(Main Menu).
(Scroll Wheel) to select
4
Use [▼], [▲] or
the desired destination, then press [OK].
You can select multiple destinations at a time.
To cancel a selected destination, select the
destination again to clear the check mark.
5
Press the right Any key to select <Set>.
(Scroll Wheel) to select