Originals Requirements
Originals Requirements
Available original type, size, weight and quantity are shown in the table below.
Type
Sheet*
Size (W × L)
Max. 8 1/2" × 14"
(Max. 215.9 mm × 355.6 mm)
Weight
Max. 4.4 lb (2 kg)
Quantity
1 sheet
*
When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover the
1
original after placing it face-down on the platen glass.
*
When copying two-sided originals, only LTR, LGL, FLSC, A4 can be used.
2
*
17 to 34 lb (64 to 128 g/m
3
*
17 to 28 lb (64 to 105 g/m
4
*
20 lb (75 g/m
) paper
5
2
Do not place the originals on the platen glass or in the feeder until the glue, ink or correction fluid on the
●
originals are completely dry.
●
Remove all fasteners (staples, paper clips, etc.) before loading the originals in the feeder.
To prevent originals from jamming in the feeder, do not use any of the following:
●
–
Wrinkled or creased paper
–
Carbon paper or carbon-backed paper
–
Curled or rolled paper
–
Coated paper
–
Torn paper
–
Onion skin or thin paper
–
Paper printed with a thermal transfer printer
–
Transparencies
2-2
Platen Glass
, book, three-dimensional objects
1
) when copying originals smaller than LTR/A4.
2
) when copying originals smaller than LTR/A4.
2
Feeder
Sheet
Max. 14" × 8.5" (355.6 mm × 215.9 mm)*
Min. 5" × 5.5" (128 mm × 139.7 mm)*
One-sided scanning (1 page): 13 to 34 lb (50 to
128 g/m
)*
2
3
One-sided scanning (more than 2 pages): 13 to 28 lb
(50 to 105 g/m
)*
2
4
Two-sided scanning: 17 to 28 lb (64 to 105 g/m
Max. 50 sheets*
5
(Max. 30 sheets for LGL originals)
2
2
)
2