Specifying Destinations
Specifying Destinations
This section describes how to specify a fax destination. You can select a destination stored
in the Address Book or a one-touch, or specify a new destination.
–
If <Restrict New Addresses> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is
set to <On>, you can only specify a destination using <Address Book>, <Search LDAP Server>, or <Log>. If you select
<Log>, you can select only settings stored. (See "Security, " in the e-Manual.)
–
The destination that you just specified is not stored in the Address Book. It is deleted once the document is sent.
–
If you frequently send documents to the same destinations, store these destinations in the Address Book beforehand. (See
"Registering Fax Numbers in the Address Book, " on p. 3-2.)
Specifying a New Fax Number
You can specify a new fax number using
For details on how to send the documents, see "Basic Methods for Sending Faxes, " on p. 5-17.
1
Press
2
Use [▼], [▲] or
<Send/Fax>, then press [OK].
5-30
– ,
(Main Menu).
(Scroll Wheel) to select
and
(numeric keys).
3
Use [▼] , [▲] or
select <Enter Fax (New)>, then press [OK].
(Scroll Wheel) to