Telephone Line Setting
Telephone Line Setting
Set the type of telephone line that is connected to the machine.
If this setting is incorrect, you will be unable to send faxes. Be sure to check the type of
telephone line that you are using, and make the correct setting.
The default setting is <Tone>.
Connect the telephone line cable before turning ON the machine, if you use the automatic detection mode.
1
Press
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or
<Communications Settings>, then press
[OK].
1-20
(Main Menu).
(Scroll Wheel) to select
4
Use [▼], [▲] or
<Fax Settings>, then press [OK].
5
Use [▼], [▲] or
<User Settings>, then press [OK].
(Scroll Wheel) to select
(Scroll Wheel) to select