Selecting Image Quality
Selecting Image Quality
You can manually select the original type according to the type of image that you are
scanning.
The default setting is <Text/Photo>.
–
Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one
of these modes, the previously set mode is canceled.
–
If you scan an original containing halftones, such as a printed image, using the <Photo> mode, the moiré effect (a
shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using the sharpness mode. (See
"Adjusting Sharpness, " on p. 5-92.)
–
If the original is a transparency, select the original type and adjust the exposure to the most appropriate level for the
original.
–
For details on how to send the documents, see "Basic Methods for Sending Faxes, " on p. 5-17.
1
Press
2
Use [▼], [▲] or
<Send/Fax>, then press [OK].
3
Specify a destination.
For details about how to specify destinations, see
"Specifying Destinations, " on p. 5-30.
5-54
(Main Menu).
(Scroll Wheel) to select
4
Use [▼], [▲] or
display <Original Image Quality
Settings>, then press [OK].
(Scroll Wheel) to