Warning Log - Canon CR-N300 Settings Manual


RTP error
R401 RTP initialization failed [crit]
Description RTP initialization error[%1] (R401)
%1 Error number
Meaning RTP could not be initialized.
Countermeasure If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.

Warning log


Audio server warning
B203 Audio message send failure [warning]
Description audio message send error %1 [%2]
(B203)
%1 Message type
%2 Error number
Meaning Failed to send audio message.
B204 Audio message receive error [warning]
Description audio message recv error [%1:%2]
(B204)
%1 Error notification number
%2 Reason for error
Meaning Failed to receive audio message.

Camera application warning
C211 Camera control command overflow
[warning]
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Send the camera control command
again after a while.

RTP warning
R101 RTSP authentication failure [notice]
Description RTSP Error: error_code=401:
Unauthorized (R101)
Meaning RTSP authentication failed.

NDI|HX error
P401 NDI|HX initialization failed [crit]
Description
%1
Meaning
Countermeasure
R102 RTSP connection failure [notice]
Description
%d
Meaning
R103 RTP session disconnected [notice]
Description
%1
Meaning
R104 RTP session deleted [notice]
Description
%1
Meaning
95
NDI|HX initialization error[%1] (P401)
Error number
NDI|HX could not be initialized.
If the error is still detected after
rebooting, it may be a failure, so contact
the dealer.
RTSP Error: error_code=%d: (R102)
400: When an invalid RTSP request is
received etc.
503: The maximum number of RTP
connections has been exceeded, or a
request for multiple session streaming
with tunneling for the same stream has
been received, etc.
RTSP connection has failed.
session closed: num_of_sessions=%1
(R103)
Total number of sessions for clients
The session was disconnected from the
client due to a factor other than
TEARDOWN. (For example, TCP FIN)
session removed: num_of_sessions=%1
(R104)
Total number of sessions for clients
The session was deleted due to errors.
(Session Timeout or when an invalid
RTSP request is received)