Table of Contents
Advertisement
[System] > [Maintenance] > [General]
Check camera information such as the firmware version, and perform maintenance on the camera system.
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build Number], [MAC Address (Wired LAN)], [MAC Address (Wireless
LAN)]
Displays information about the camera.
Tool
Displays license, initialization of the Pan/Tilt settings, and rebooting the camera.
[See Third Party Software License Conditions]
Third party software license information is displayed as a list.
[Pan/Tilt Initialization]
If the Pan/Tilt position shifts, click [Execute] to initialize the position.
[Reboot]
Reboots the camera.
Initialization
Initialize the camera.
Important
• Do not turn off the power to the camera while performing [Restore Default Settings]. Turning off the camera at this stage may result in
disabling its ability to boot correctly.
• Once [OK] is clicked, the process of restoring the default settings cannot be interrupted.
80
Hide quick links:
Advertisement
Table of Contents
