Canon CR-N300 Settings Manual page 109

Remote camera
Hide thumbs Also See for CR-N300:
Table of Contents

Advertisement

Server
Video Output Format
Protocol
Preset
Interface
Communication Control
Network Terminal
3G-SDI OUT Terminal
HDMI OUT Terminal
RS-422 Terminal
MIC Terminal
USB Terminal
SDI
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
– Same video format required for SDI and HDMI (cannot select different
formats for SDI and HDMI)
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
HDMI
3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit)
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)
– Same video format required for SDI and HDMI (cannot select different
formats for SDI and HDMI)
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.
IP
3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)
– If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format
cannot be selected.
– A frame rate that exceeds the frame frequency cannot be selected.
– JPEG has one pattern fixed depending on the frame frequency (format is
fixed and cannot be selected)
Resolution: 1280 x 720
When frame frequency is 59.94/50.00 Hz: 14.99 fps
When frame frequency is 23.98 Hz: 11.99 fps
When frame frequency is 29.97/25.00 Hz: 12.50 fps
USB
Motion JPEG: 1920 x 1080, 1280 x 720, 640 x 360
59.94 Hz: 12.00 fps, 5.00 fps
50.00 Hz: 12.50 fps, 5.00 fps
XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard
Communication (Serial), Standard Communication (IP)
Number of presets: Max. 100 (including home position)
LAN, Wi-Fi, Serial, IR, USB
LAN x 1, RJ45, 1000Base-T
BNC jack (output only) x 1, 0.8 Vp-p/75 , unbalanced
SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant
Embedded audio, Time code (VITC/LTC)
HDMI connector x 1, output only
RJ45 connector x 1
Ø3.5 mm stereo mini jack (unbalanced, plug-in power supported)
Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 k or
more/Att.: 20 dB
Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 k or
more
Supply Voltage: 2.4 V DC (Bias resistance: 2.2 k)
Type-C (USB 3.0) x 1
109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr-n500

Table of Contents