[System] > [Communication] > [External Connection (Ip)]; Standard Communication (Ip); Ndi|Hx - Canon CR-N300 Settings Manual

[System] > [Communication] > [External Connection (IP)]
Settings for communication for connecting controllers, etc. via IP.

Standard Communication (IP)

Settings for operating the cameras from the controller connected by the standard IP communication.
[Standard Communication (IP)]
Select whether to use [Standard Communication (IP)] for the connection with the controller.
[Response Port Number]
Select whether to use a fixed port number (52381) or a source port number when communicating with the controller.
[Camera IP Settings Inquiry]
Select whether to allow the inquiry on the camera IP settings from the controller.
[Camera IP Settings Network Settings]
Select whether to allow to change the network settings of the camera from the controller.

NDI|HX

Settings for exchanging data with NDI|HX supported devices.
[NDI|HX]
Select whether to use [NDI|HX] as the communication protocol.
For setting to [Enable], go to [System] > [Communication] > [Network] > [mDNS] and select [Enable] (P. 61).
Note
When [System] > [Video and Audio] > [IP Streaming Video] > [Mainstream] >[Video Codec] is set to [H.265], NDI|HX cannot be used.
[Audio Transmission]
Select whether to use the audio transmission.
When [Disable] is set for [System] > [Video and Audio] > [Audio] > [General Audio] > [Audio Input], [Enable] cannot be set.
[Discovery Server]
Select whether to use the Discovery Server.
When set to [Enable], it notifies the Discovery Server only of the IP address and does not notify other hosts of the IP address
nor hostname.
[Discovery Server IP Address]
Enter the IP address of the Discovery Server.
[Multicast Distribution]
Select whether to use the multicast distribution.
64