Canon CR-N300 Settings Manual page 28

Remote camera
Hide thumbs Also See for CR-N300:
Table of Contents

Advertisement

Shooting Mode
Item
Gain
AGC Limit
AE Shift
Metering Mode
AE Response
Flicker Reduction
Auto Slow Shutter
*1 Possible to select [Auto] or off.
*2 Linked to the iris settings.
*3 Possible to set the shutter speed.
*4 Possible only if one of Shutter Mode, Iris and Gain is set to [Auto].
[Iris (Aperture Value)]
Adjusts the iris (aperture) according to the brightness of the subject.
When [Auto] is set, the iris is automatically adjusted.
When [Auto] is off, the iris can be manually adjusted. Moving the slider to the left opens the aperture and brightens the
video. Moving it to the right narrows the aperture and darkens the video. Following aperture values can be set.
N500
F2.8, F3.1, F3.4, F3.7, F4.0, F4.4, F4.5, F4.8, F5.2, F5.6, F6.2, F6.7, F7.3, F8.0, F8.7, F9.5, F10, F11
N300
F1.8, F2.0, F2.2, F2.4, F2.6, F2.8, F3.1, F3.4, F3.7, F4.0, F4.4, F4.8, F5.2, F5.6, F6.2, F6.7, F7.3, F8.0
The aperture value that can be set differs depending on the zoom position. Reference aperture value is displayed on the
screen.
N500
Maximum wide angle: F2.8 to F11, maximum telephoto: F4.5 to F11
N300
Maximum wide angle: F1.8 to F8.0, maximum telephoto: F2.8 to F8.0
Note
• By changing the depth of field and blur the background or surroundings to make the subject stand out, set a smaller aperture value, and
to keep everything from close objects to far-away objects in focus, set a larger aperture value.
• When shooting in a bright location, narrowing down the iris can cause blurring. It is possible to prevent blurring by adjusting the ND filter
and shutter speed and opening the iris.
• When [AUTO] of the iris is set to off, the aperture value from Auto is inherited. The aperture value before setting to [AUTO] is not restored.
N500
[ND Filter]
Choose whether to use the ND filter. ND filter can be switched to three levels (1/4, 1/16, 1/64). The ND filter allows to open
the aperture for a video with shallow depth of field even in a bright environment. This is also convenient for avoiding blur
caused by narrowing down the aperture.
Note
Changing the ND Filter settings in certain shooting conditions could generate some slight change in coloring. In this case, it is effective to
set the white balance when shooting (P. 31).
N300
[ND Filter]
The ND filter allows to open the aperture for a video with shallow depth of field even in a bright environment. This is also
convenient for avoiding blur caused by narrowing down the aperture.
When the [Shooting Mode] is set to
or larger, ND filter is automatically adjusted linked to the setting of the iris. In other shooting modes, when [Iris (Aperture
Value)] is F4.0 or larger, the exposure is automatically adjusted using the ND filter.
In
(Iris Priority AE),
the exposure without using the ND filter, [Auto] can be set to off.
Note
When the [Shooting Mode] is set to
is always automatically adjusted.
[Shutter Mode]
Adjusting the shutter speed enables to adapt to the subjects and the shooting environment, making it possible to capture
fast-moving subjects (sports, vehicles, etc.) clearly and brighten low-light scenes, etc. Shutter speed can be adjusted in the
following modes:
N300
(Iris Priority AE) or
(Manual Exposure),
(Full Auto),
(Portrait),
N300
(Manual Exposure) and the [Iris (Aperture Value)] is F4.0
(Program AE), or
(Shutter Priority AE), in order to adjust
(Sports),
(Low Light), or
28
N300
4
*
(Spotlight), ND filter
N300

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr-n500

Table of Contents