Canon CR-N300 Settings Manual page 77

If the NTP server address can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server
address acquired from the DHCP server (IPv4) will be used.
[Synchronization Interval (minutes)]
Enter the query interval for the specified NTP server.
[Last Sync Time]
The time last synchronized with the specified NTP server will be displayed.
[Synchronize with computer time]
The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],
[Settings Method] will change to [Set manually].
[Time Zone] is not automatically selected, so set it if necessary.
Note
If the NTP server IP address is incorrect or a connection with the NTP server cannot otherwise be established, [Last Sync Time] will not be
updated, or will be left blank.
[Time Zone]
Select the appropriate GMT (Greenwich Mean Time) time difference.
When the time zone is changed and [Apply] is selected, the date and time will be automatically changed based on the
selected time zone.
[Daylight Saving Time]
Select whether to automatically adjust for daylight saving time to suit the time zone.
77