Configuration Of The Settings Page - Canon CR-N300 Settings Manual

Configuration of the Settings Page

The configuration of the Settings Page is as follows:
(1) (2)
(5)
(6)
(9) to (16)

Header
This area is common to all Settings Pages.
(1) Model Name
Displays the model name of the connected camera.
(2) Tally Lamp Status Display
Displays the video distribution status on the Tally Lamp.
: Distributing
: Preparing for distribution
: No distribution
(3) Power ON/Standby
Switches between the camera on and standby mode. Set it to standby mode if needing to stop HDMI/SD output
or IP distribution of videos.
If is clicked while the camera is on, "This will switch to standby. Do you want to continue?" message will
appear. Click [OK] and "On Standby" will appear in the video display area and will go into standby mode. Click
[Start Up] to return to the power on state.
The power lamp on the front of the camera is as follows:
On (green): Power on
ON (orange): Standby
Blinking (green): Changing to or from standby
(4) Menu
Click to display a list of items in the settings area.
For details of the items, refer to the "Settings Area" (P. 24).
23
(3) (4)
Header
(7)
(8) Video display/
operation area
Settings area