[System] > [Maintenance] > [Update Firmware]; Device Information; Update Firmware - Canon CR-N300 Settings Manual

[System] > [Maintenance] > [Update Firmware]
Perform firmware update.

Device Information

[Model Name], [Firmware Version]
Camera information is displayed.

Update Firmware

Performs firmware update.
Important
Do not turn off the power to the camera while performing [Update Firmware]. Turning off the camera at this stage may result in disabling
its ability to boot correctly.
[Restore Default Settings]
Updating the firmware restores to the default settings.
If set to [Restore], everything is restored except the following settings.
• Network Settings
• NTP Server
• HTTP Server
• Host Access Restrictions
• Time Zone
• Certificates
• SSL/TLS
• Administrator Name
• Administrator Password
Note
Even if the [Restore Default Settings] is set to [Do not restore], the [Wireless LAN] setting will be restored.
[Update Firmware]
Click [...] to select the firmware file for updating and click [Execute]. When a confirmation message is displayed. click [OK]
to start Update Firmware. During update, the camera's front STATUS lamp will blink.
After update firmware is performed, the camera will be rebooted.
83