Administrator Account; Authorized User Account; User Authority - Canon CR-N300 Settings Manual

Administrator Account

Settings for changing the administrator account information that was set at initial setting.
Important
• To ensure system security, set the administrator password that should not be easily guessed by third parties. Be sure not to forget the
new password.
• If administrator password is forgotten, restore to the factory default settings (P. 100). Note, however, that this will reset all camera
settings to factory default settings including the administrator account, the network information, date and time.
[Administrator Name]
Enter the administrator name using alphanumeric characters, hyphens (-), and underscores (_). However, hyphens (-), and
underscores (_) cannot be used at the beginning.
[Password]
Enter the administrator password. Use at least two types from alphanumeric characters, numbers, and symbols.
[Confirm Password]
Enter the same password as above for confirmation.

Authorized User Account

Add authorized users.
[User Name], [Password], [Confirm Password]
To add the authorized user, enter the user name and password, then click [Add].
Enter the user name using alphanumeric characters, hyphens (-), and underscores (_).
Up to 15 authorized users can be added.
For password, use at least two types from alphanumeric characters, numbers, and symbols.
[User List]
Displays a list of added authorized users.
Able to sort the list items in ascending order by clicking
Select a user in the list and click

User Authority

Set the privileges for authorized users and guest users. This setting enables to set access restrictions for the Settings Page.
[Camera Control], [Video Distribution]
Select the items for granting users privileges.
An authorized user has higher privileges than a guest user.
Important
However, when connected to the RTP server as an authorized user, it is disabled to restrict guest users' privileges.
and in descending order by clicking
to remove the registered user.
71
.