Introduction; Trademarks; Software License Agreement; Third Party Software - Canon CR-N300 Settings Manual

Remote camera
Hide thumbs Also See for CR-N300:
Table of Contents

Advertisement

Introduction

Thank you for purchasing a Canon Remote Camera (hereafter referred to as the camera)*.
This camera is for indoor use only.
This "Settings Guide" document explains the camera settings and operations. Read this guide carefully before using the
camera to ensure correct use. Also, be sure to read the 'Safety Precautions' of the "Installation Guide/Important Information"
included with the camera.
* The cameras described in this document may include models not available in your country and/or region.
For the latest information on this product (firmware and software, user manuals, operating environment, etc.), please refer to
the Canon website.

Trademarks

• Microsoft, Windows, Microsoft Edge, Surface and ActiveX are trademarks or registered trademarks of Microsoft
Corporation in the United States and other countries.
• Windows is legally recognized as the Microsoft Windows Operating System.
• This product comes with exFAT, a licensed file system technology from Microsoft.
• iPhone, iPad, and Safari are trademarks of Apple Inc.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• HDMI is a trademark or registered trademark of HDMI Licensing Administrator, Inc. in the United States and other
countries.
• Android is a trademark of Google LLC.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• NDI is a trademark or registered trademark of NewTek, Inc. in the United States and other countries.
• All other company or product names used in this document are trademarks or registered trademarks of their respective
holders.

Software License Agreement

For the software license agreement, refer to the text file provided with the software and installer.
Except as expressly permitted by the law in effect in the jurisdiction in which you are located, you shall not reverse
engineer the firmware which is contained in this product ("Firmware") and you shall not modify the Firmware. TO THE FULL
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EITHER CANON, OR CANON'S LICENSORS BE
LIABLE FOR ANY DAMAGES WHATSOEVER ARISING OUT OF USING THE FIRMWARE. The Firmware may contain third
party software components. Notwithstanding anything contained herein to the contrary, the terms and conditions of such
third party software components shall be applied to your usage of the Firmware.

Third Party Software

This camera contains third party software modules. Confirm each module's license conditions in [System] > [Maintenance]
> [General] > [Tool] > [See Third Party Software License Conditions] on the Settings Page.
Software Licensed Under the GPL and LGPL
If you would like to acquire the source code licensed under the GPL and LGPL, please contact us using one of the following
methods:
(1) To receive an e-mail with the URL to download the source code,
access <https://global.canon/en/oss/scd/index.html> and complete the request form; or
(2) To receive the source code by post,
send us a letter in writing to the address below with the following information.
In the case you have chosen (2), WE MAY CHARGE YOU for the delivery cost.
(i)
Your Address (Country/Region, ZIP code, Address, Your name) [mandatory]
(ii)
Your e-mail address (for the purpose of possible communication with us) [optional]
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr-n500

Table of Contents