Rtmp - Canon CR-N300 Settings Manual

Note
For multicast distribution, set the multicast distribution enabled in the NDI client side as well.
[Multicast TTL]
Enter the effective range for multicast distribution.
The TTL (Time To Live), representing the effective range for multicast distribution, is decremented each time the signal
passes through a router. When it reaches 0, distribution through a router becomes impossible.
For example, if TTL is set to [1], multicast distribution is confined to the local segment only and cannot pass through the
router.
[Group Settings]
Select whether to use the group settings.
When a group name to which the camera belongs is specified, the camera connects only to NDI clients with the same
group name.
[Group Name], [Group List]
Enter the group name.
By clicking [Add], the entered group name will be displayed in the group list.
Able to sort the list items in ascending order by clicking
Select a group in the group list and click

RTMP

A communication protocol for the streaming playback of video and audio, and sending and receiving the data.
[RTMP]
Select whether to use [RTMP] as the communication protocol.
Note
When [H.265] is set for [System] > [Video and Audio] > [IP Streaming Video] > [Mainstream] > [Video Codec], RTMP cannot be used.
[Video Stream]
Select the type of the video stream. Substream 2 cannot be used.
[Audio Stream]
Select whether to use the audio stream.
When [Disable] is set for [System] > [Video and Audio] > [Audio] > [General Audio] > [Audio Input], [Enable] cannot be set.
[URL]
Enter the URL of the server set on the distribution server side.
Enter the string of characters starting with rtmp:// or rtmps://.
[Stream Key]
Enter the stream key set on the distribution server side.
[Streaming]
By clicking [Start] to start the streaming, the button becomes [Stop].
By clicking [Stop], the streaming ends.
and in descending order by clicking
to delete the group.
65
.