Split Memory - Yaesu FTM-400DR Operating Manual

Using the Memory
5
Touch [1 ALPHA TAG SIZE] to select the memory
tag display size
The setting will switch between "SMALL" and
"LARGE" each time it is touched.
"SMALL": Display the memory tag in small-sized
characters and the frequency in large-
sized characters.
"LARGE": Display the memory tag in large-sized
characters and the frequency in small-
sized characters.
Tip Factory default value: LARGE
6
Press for one second or longer
The size of the memory tag display will be set and the display will return to the
previous screen.
Tip The display method can also be changed by pressing
memory mode.
LARGE
Split memory
Separate frequencies for transmit and receive can be registered for each memory
channel.
● Simultaneous registration
1
Select the receive frequency in the VFO mode
2
Press for one second or longer
The memory writing screen will be displayed.
3
Press for one second or longer
The character input screen will be displayed.
Tip Refer to Steps 4 to 11 in "Naming a memory channel" (
P.66) when assigning a name to a memory channel.
4
Touch [TX IN]
The number input screen will be displayed.
68
for one second or longer in the
SMALL