Aprs And Data Communication - Yaesu FTM-400DR Operating Manual

Using the Set-up Menu
Setting the operating band of the APRS and data communication
The operating band of the APRS (internal modem) and data communication (when using
the [DATA] jack at the back of the main body) can be set.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [DATA]
3
Touch [2 DATA BAND SELECT]
The screen for the detailed settings will be displayed.
4
Touch [APRS] to select the APRS operating band
The setting changes as follows each time it is
touched.
"A-BAND FIX" → "B-BAND FIX" → "A=TX/B=RX" →
"A=RX/B=TX" → "MAIN BAND" → "SUB BAND"
A-BAND FIX: The upper band will be selected.
B-BAND FIX: The lower band will be selected.
A=TX/B=RX: Transmits using the upper band and
A=RX/B=TX: Receives using the upper band and
MAIN BAND: The main band will be selected.
SUB BAND: The sub-band will be selected.
Tip Factory default value: B-BAND FIX
5
Touch [DATA] to select the data transmission
operating band
Repeat Step 4 to set the data communication
operating band.
Tip Factory default value: B-BAND FIX
6
Press for one second or longer
The operating band of the APRS and data communication will be set and the display
will return to the previous screen.
196
receives using the lower band.
transmits using the lower band.