Using Dcs - Yaesu FTM-400DR Operating Manual

5
Turn to select the DSC code
Tip Factory default value: 023
6
Touch [2 DCS CODE]
The characters of the set value will turn green in
color.
7
Press for one second or longer
The DCS code will be set and the display will return to the previous screen.
Tip The display can also be returned to the previous screen by touching [BACK] twice.
Using DCS
1
Press
The function menu will be displayed.
2
Touch [SQL] to display "D-TRX"
Tips • When [SQL] is not displayed in the menu, use [BACK]
or [FWD] to change the menu.
• The squelch type changes in the following sequence
each time it is touched.
"NOISE" "T-TX" "T-TRX" "T-REV" "D-TRX" "PRGM"
"PAGER" "D-TX"* "TT/DR"* "DT/TR"*
* These squelch types will be displayed when
[SIGNALING] → [8 SQL EXPANSION] is set to "ON"
in the set-up menu.
The squelch will open only when the set DCS code is
received.
Tip
A bell can be rung (beep) when signals containing the same DCS code are received (
Communicating with Specified Partner Stations
P.110).
105