Writing Group Ids To The Micro-Sd Card; Initializing The Micro-Sd Card; Optional Device Settings; Setting The Image Of The Connected - Yaesu FTM-400DR Operating Manual

Using the Set-up Menu
Writing group IDs to the micro-SD card
The group ID information registered in the radio can be written to a micro-SD card.
The group ID information saved in the micro-SD card can also be downloaded into the
radio.
Refer to the separate Operating Manual GM Edition for further details (download the
operating manual from the YAESU website).
Initializing the micro-SD card
Initialize the memory card when using a new micro-SD card.
Refer to "Initializing the micro-SD card" (
Optional device settings
Setting the image of the connected speaker microphone with camera
The image size and quality when taking pictures with the connected speaker
microphone with a camera (MH-85A11U) can be set.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [OPTION]
3
Touch [1 USB CAMERA]
The screen for setting the image will be displayed.
• PICTURE SIZE: Sets the size of the picture to be
taken.
• PICTURE QUALITY: Sets the quality of the picture
to be taken.
4
Touch [PICTURE SIZE] to set the picture size
The setting changes between "160✽120" and
"320✽240" each time it is touched.
Tip • Factory default value: 320✽240 (unit: pixel)
• It takes about 30 seconds to sending a picture in the
size of 320✽240 to other transceivers.
200
P.35) for details.