Installing The Main Body - Yaesu FTM-400DR Operating Manual

Installing the main body
Install the main body using the provided MMB-36 bracket.
1
Select the installation location
Caution Select a location where the antenna coax and power cable can be securely attached.
Tip Also refer to "Installation location when used in a mobile unit" (
2
Drill four 6 mm diameter holes in the location where the bracket is to be mounted,
matching the positions of the bolting holes of the bracket
3
Attach the bracket using the provided bolts, nuts
and washers
4
Fasten the main body to the bracket, using the
provided flange bolts, as shown in the drawing
Tip The mounting angle can be changed depending on
the securing position of the flange bolts.
Installing the Radio
P.24).
Bracket
Main body
Flange bolt
Nut
Washer
Washer
Bolt
27