Split Memory - Yaesu FTM-500DR Operating Manual

Split Memory

Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
1. Register the receive frequency to a memory channel first.
For additional details on registering to a memory channel, refer to page 44.
To edit a memory channel that has already been written, go to step 2.
2. Press and hold the
The memory channel list appears.
The memory channel list can also be displayed by the following operations:
Press the FUNC knob  Touch [KEYPAD]  Select [MEMORY CH LIST]  Press the
FUNC knob
3. Rotate the FUNC knob to select the channel number that the receive frequency was
registered to on step1, and press the FUNC knob.
4. Touch [EDIT].
Or rotate the FUNC knob to select [EDIT], then press
the FUNC knob.
5. Touch [TX FREQ].
Or rotate the FUNC knob to select [TX FREQ], then
press the FUNC knob.
6. Set the transceiver to the desired transmit frequency.
7. Touch [OK].
Or rotate the FUNC knob to select [OK], then press the FUNC knob.
8. Confirmation screen is displayed, touch [OK] or press
the FUNC knob.
The display returns to the memory channel list screen,
and the receive frequency is displayed on the upper
side, and the transmit frequency is displayed on the
lower side.
9. Press the DIAL knob, SUB DIAL knob or PTT switch
to save the settings and return to normal operation.
When recalling the split memory "
the LCD.
While operating the split memory, to reverse the transmit and receive frequencies temporarily:
Press the FUNC knob → [RPT-R]
When reversing the frequencies, "
key.
" is displayed on
" will blink.
MEMORY CH LIST
021 433.300 YAESU
022 433.620 FTM-500D
023 433.300 JA1YOE
433.100
024 DIGITAL
433.200
MEMORY INFORMATION
RX FREQ 433.340
TX FREQ
.
|||
TAG YAESU
SCAN YES
OK BACK
MEMORY CH LIST
433.340
021 YAESU
145.720
022 433.620 FTM-500D
023 433.300 JA1YOE
433.100
024 DIGITAL
433.200
|||
>
51