Using the Timer Function
Using the TOT function
When the TOT (Timeout Timer) function is switched on, the radio will automatically return
to the reception mode after a prescribed time has passed in the transmission mode. A
notification beep will sound about 10 seconds before the radio returns to the reception
mode*. This can help to prevent unintended radio waves from being sent out by mistake
and the battery from being used up.
* Beep sound does not function in the digital mode.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
The menu list will be displayed.
3
, or touch the screen to select [14 TOT]
Turn
4
Touch [14 TOT]
The characters of the set value will turn orange in
color.
5
Turn
to select the time
The time will change in the following sequence.
"OFF" "1 min" "3 min" "5 min" "10 min" "15 min"
"20 min" "30 min"
6
Touch [14 TOT]
The characters of the set value will turn green in color.
7
Press
twice briefly
The TOT function will be switched on and the display will return to the previous screen.
Tip
The display can also be returned to the previous screen by touching [BACK] twice.
120