Yaesu FTM-400DR Operating Manual page 111
144/430mhz 50w dual band c4fm fdma/fm
Hide thumbs
Also See for FTM-400DR:
- Operating manual (217 pages) ,
- Instruction manual (97 pages) ,
- Firmware update instruction manual (19 pages)
Table of Contents
Advertisement
Communicating with Specified Partner Stations
● DCS transmission
Touch [SQL] in the function menu to display "D-TX".
The radio sends out the DCS code during transmit.
This can be used only when [SIGNALING] → [8 SQL EXPANSION] is set to "ON" in the
set-up menu.
● Tone transmission / DCS reception
Touch [SQL] in the function menu to display "TT/DR".
The radio sends out a tone signal during transmit and goes into receive standby for the
previously set DCS codes.
This can be used only when [SIGNALING] → [8 SQL EXPANSION] is set to "ON" in the
set-up menu.
● DCS transmission / tone reception
Touch [SQL] in the function menu to display "DT/TR".
The radio sends out the DCS code during transmit and goes into receive standby for the
previously set squelch tone.
This can be used only when [SIGNALING] → [8 SQL EXPANSION] is set to "ON" in the
set-up menu.
111
Advertisement
Table of Contents
