Using The Timer Function; Using The Stopwatch Function; Displaying The Timer / Clock Screen - Yaesu FTM-400DR Operating Manual

Using the Timer Function
Using the stopwatch function
This radio is equipped with a lap timer and countdown timer. These can be used by
switching to the timer / clock screen.
Displaying the timer / clock screen
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [DISPLAY]
The menu list will be displayed.
3
Turn , or touch the screen to select [1 DISPLAY SELECT]
4
Touch [1 DISPLAY SELECT]
The screen for setting the various screens on or off
will be displayed.
5
Touch [TIMER/CLOCK] to select "ON"
Each time this is touched, the setting will switch
between "OFF" and "ON".
6
Press for one second or longer
The display will return to the previous screen.
Tip The display can also be returned to the previous screen
by touching [BACK] twice.
7
Press twice briefly
The timer/clock screen will be displayed.
Tip The screen will change in the following sequence each
time is pressed when both the altitude display screen
and GPS screen are "ON".
Normal frequency display → Compass/Lat&Lon display
screen → Altitude display screen → Timer/Clock screen
→ GPS screen
115