Setting The Display Method For My Position; Setting The Standby Beep; Displaying The Version Of The Dsp Program - Yaesu FTM-400DR Operating Manual
144/430mhz 50w dual band c4fm fdma/fm
Hide thumbs
Also See for FTM-400DR:
- Operating manual (217 pages) ,
- Instruction manual (97 pages) ,
- Firmware update instruction manual (19 pages)
Table of Contents
Advertisement
Using the Set-up Menu
Setting the display method for my position
Refer to the separate Operating Manual GM Edition (download the manual from the
YAESU website).
Setting the Standby Beep
When communicating in a digital mode, a beep is sounded after the end of the other
stations transmission.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [TX/RX]
3
Touch [DIGITAL]
4
Touch [6 STANDBY BEEP] to select OFF/ON
The setting will switch between "ON" and "OFF" each
time the symbol is touched.
OFF: Disable the STANDBY BEEP feature.
ON: Enable the STANDBY BEEP feature.
Tip
Factory default value: ON
5
Press
for one second or longer
The display will return to the previous screen.
Displaying the version of the DSP program
The version of the DSP program in the digital unit inside the radio can be checked.
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [TX/RX]
3
Touch [DIGITAL]
4
Touch [7 DSP VERSION]
The version of the DSP program will be displayed.
5
Press
for one second or longer
The display will return to the previous screen.
178
Advertisement
Table of Contents
