Communicating In The Fm Mode - Yaesu FTM-400DR Operating Manual

2
Touch [TX/RX]
The menu list will be displayed.
3
Touch [AUDIO]
The menu list will be displayed.
4
Touch [3 MIC GAIN] to select the sensitivity
The sensitivity will change in the following sequence
each time the screen is touched.
"MIN" → "LOW" → "NORMAL" → "HIGH" → "MAX"
Tips • The sensitivity can also be selected by pressing
• Factory default value: NORMAL
5
Press for one second or longer
The sensitivity is set and the display returns to the
previous screen.
Tip The display can also be returned to the previous screen
by touching [BACK] twice.
Communicating in the FM mode
1
Choose the operating band
2
Select "FM" as the modulation mode
3
Tune the radio using
4
Press and hold the microphone [PTT] to talk
Tip
The Narrow FM mode can also be used. Set the mode to [NARROW FM] under [TX/RX] → [MODE]
in the set-up menu.
Communicating
.
51