Recalling The Memory; Recalling The Home Channel - Yaesu FTM-400DR Operating Manual

Tips
• When shipped from the factory, the frequency in memory channel 1 of Band A is set to 144.000 MHz
while the frequency in memory channel 1 of Band B is set to 430.000 MHz. These can be changed
to other frequencies but cannot be erased.
• Names can also be assigned to the memory channels (
• 9 pairs of PMS memory channels can be written for Band A and Band B each (
Recalling the memory
1
Touch [V/M] to switch the mode
The memory channel last used will be shown in the
display.
2
Turn to select the memory channel
Touch [V/M] again to return to the VFO mode.
Tip
Non-registered memory channels will be skipped.
Recalling the home channel
1
Press
The function menu will be displayed.
2
Switch the menu using [BACK] and [FWD]
Using the Memory
P.66).
P.79).
63