Changing The Frequency Of The Home Channel - Yaesu FTM-400DR Operating Manual

Using the Memory
3
Touch [HOME]
The home channel will be shown in the display.
Tip Change the frequency using
mode.
Touch [HOME] again to return to the VFO mode and
display the frequency that was selected before the
home channel was recalled.
Tip
When shipped from the factory, the frequency in the home channel of Band A is set to 144.000 MHz
while the frequency in the home channel of Band B is set to 430.000 MHz.
Changing the frequency of the home channel
The default frequency setting of the home channel when shipped from the factory can
be changed.
1
Switch to the VFO mode
2
Adjust the frequency using
3
Press for one second or longer
The memory writing screen will be displayed.
4
to select [HOME]
Turn
5
Press
The overwrite confirmation screen will be displayed.
64
to return to the VFO