Transmitting The Registered Dtmf Code - Yaesu FTM-400DR Operating Manual
144/430mhz 50w dual band c4fm fdma/fm
Hide thumbs
Also See for FTM-400DR:
- Operating manual (217 pages) ,
- Instruction manual (97 pages) ,
- Firmware update instruction manual (19 pages)
Table of Contents
Advertisement
7
Touch the character keys to input the DTMF code
Tip
The DTMF code can also be input using the character
keys on the microphone.
8
Touch [ENT]
The DTMF code will be set.
Tip
Repeat Steps 5 to 8 when registering additional numbers
in the other channels..
9
Press
for one second or longer
The DTMF code will be set and the display will return to the previous screen.
Tip
The display can also be returned to the previous screen by touching [BACK] twice.
Transmitting the registered DTMF code
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [SIGNALING]
The menu list will be displayed.
3
Turn
, or touch the screen to select [3 AUTO DIALER]
4
Touch [3 AUTO DIALER] to select "ON"
The auto dialer will switch between "ON" and "OFF"
each time it is touched.
5
Press
for one second or longer
The display will return to the previous screen.
Tip
The display can also be returned to the previous screen
by touching [BACK] twice.
6
Press
The function menu will be displayed.
7
Touch [DTMF]
The character will turn orange in color.
Tip
When [DTMF] is not displayed in the menu, use [BACK]
or [FWD] to switch the menu.
Using the DTMF Function
113
Advertisement
Table of Contents
