Scan Only The Specified Memory Channels - Yaesu FTM-400DR Operating Manual

Signal Search
2
Select the memory channel to be specified by turning
Tip The memory channel may also be selected by touching it
on the screen.
3
Touch [SKIP/SEL] to display "SELECT"
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
"OFF" → "SKIP" → "SELECT"
Tip Repeat Steps 2 and 3 to specify the other memories next.
4
Touch [BACK]
Return to the previous screen, and "" will be displayed on the left side of the
memory channel number.
(2) Specify individually using the function menu screen
1
Switch to the memory mode, and recall the memory channel to be set as the
specified channel
2
Press
The function menu will be displayed.
3
Touch [SKIP/SEL] to display "SELECT"
"" will be displayed on the left side of the memory
channel number.
Tip When [SKIP/SEL] is not displayed in the function menu,
touch [BACK] or [FWD] to change the menu.
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
"OFF" → "SKIP" → "SELECT"
Scan only the specified memory channels
1
First, select the band to be scanned, before switch to the memory mode
2
Press for one second or longer
The set-up menu will be displayed.
3
Touch [MEMORY]
The menu list will be displayed.
76