Yaesu FTM-400DR Operating Manual page 53

2
Touch [CONFIG]
The menu list will be displayed.
3
Turn , or touch the screen to select [4 AUTO RPT
SHIFT]
4
Touch [4 AUTO RPT SHIFT] to select "ON"
The setting will switch between "ON" and "OFF" each
time it is touched.
5
Press for one second or longer
The automatic repeater shift will be set and the
display will return to the previous screen.
Tip The display can also be returned to the previous screen
by touching [BACK] twice.
● Tone Calling (1750 Hz)
Press and hold in the program key [P1] of the microphone (MH-48) to generates a 1750
Hz burst tone to access the repeater. The transmitter will automatically be activated, and
a 1750 Hz audio tone will be superimposed on the carrier. Once access to the repeater
has been gained, you may release the [P1] key, and use the [PTT] for activating the
transmitter thereafter.
Communicating
53