Table of Contents
Advertisement
Using the Memory
5
Touch [1 ALPHA TAG SIZE] to select the memory
tag display size
The setting will switch between "SMALL" and
"LARGE" each time it is touched.
"SMALL": Display the memory tag in small-sized
characters and the frequency in large-
sized characters.
"LARGE": Display the memory tag in large-sized
characters and the frequency in small-
sized characters.
Tip
Factory default value: LARGE
6
Press
for one second or longer
The size of the memory tag display will be set and the display will return to the
previous screen.
Tip
The display method can also be changed by pressing
memory mode.
LARGE
Split memory
Separate frequencies for transmit and receive can be registered for each memory
channel.
● Simultaneous registration
1
Select the receive frequency in the VFO mode
2
Press
for one second or longer
The memory writing screen will be displayed.
3
Press
for one second or longer
The character input screen will be displayed.
Tip
Refer to Steps 4 to 11 in "Naming the memory" (
when assigning a name to a memory channel.
4
Touch [TX IN]
The number input screen will be displayed.
72
for one second or longer in the
SMALL
P.70)
Advertisement
Table of Contents
