Home Channel Memory Recall; Changing The Home Channel Frequency; Memory Offset Tuning - Yaesu FT-25E Operating Manual

HOME Channel Memory Recall

A "HOME" channel memory is provided for each operating band, to allow
quick recall of a favorite operating frequency on each band. The default
home channels are below:
144 MHz Band
FM Radio Band
1. Press the F key, then press the [ P1] key.
The default home channel, as listed above,
is displayed.
2. Press the F key, then press the [P1] key to exit to normal operation.
Repeat this process to recall the HOME channel on any operating band.

Changing the Home Channel Frequency

The home channel frequencies may be changed from the default settings.
1. While operating in the VFO mode, select the desired frequency.
2. Press and hold the [ MR] key.
A blank memory channel will be displayed.
3. Press the [P1] key.
•
"HOME-IN" will be displayed, and then exit
to normal operation.
• The home channel frequency is changed and overwriting is complete.

Memory Offset Tuning

Once a particular memory channel is recalled, it is easy to tune off that chan-
nel, as though you were in the "VFO" mode.
1. Recall the memory channel.
2. Press the [ MR] key to activate the "Memory
Channel Tuning" feature.
The Memory Channel number on the LCD
display will be replaced by "tun".
FT-25R/FT-25E Operating Manual
Default Home Channels
Band
Memory Mode
Frequency
144.000 MHz
95.000 MHz
33