Masking Memories; Unmasking Memories; Home Channel Memory; Changing The Frequency Of The Home Channel - Yaesu FTM-3207DE Operating Manual

Memory Operation

Masking Memories

There may be situations where you want to "Mask" memories so they are not visible
during memory selection or scanning. (except for Memory Channel "1", the Priority Chan-
nel, and the Home Channel).
1. In the Memory Recall mode, press and hold
the [ V/M ( MW )] key for one second, then
rotate the DIAL knob to select the memory
channel you wish to mask.
2. Press the [ SQL ( TXPO )] key.
The erase confirmation screen appears.
3. Press the [ SQL ( TXPO )] key.
The previously selected memory will be
"masked".
Note: Press any key, other than [ SQL ( TXPO )], to cancel the memory mask.

Unmasking Memories

1. To Unmask a hidden memory, in the Memory Recall mode, press and hold the
[ V/M ( MW )] key for one second.
2. Rotate the DIAL knob to select the masked memory number.
3. Press the [ SQL ( TXPO )] key to restore the memory channel data.

HOME Channel Memory

A convenient one-touch "Home" channel memory is available to simplify returning to an
often used frequency.
To recall the Home channel, just press the
[ V/M ( MW )] key, repeatedly if necessary, until
the " " icon appears on the display; this
indicates that the Home Channel has been
recalled.
Note: When shipped from the factory, the
Home Channel is set to 446.000 MHz
(USA version) or 433.000 MHz (EXP/
European version).

Changing the frequency of the home channel

The default frequency setting of the home channel can be changed.
1. In the VFO mode, tune to the desired Home channel frequency.
2. Press and hold the [ V/M ( MW )] key for one second, and then press the [ REV ( DW )] key.
The overwrite confirmation screen appears.
3. Press the [ REV ( DW )] key.
The home channel frequency is overwritten.
32
VOL
SQL REV
TXPO
VOL
SQL REV
TXPO
FTM-3207DR/DE Operating Manual
DIAL
D/A M H z V / M
D W SETUP M W
DIAL
D/A M H z V / M
D W M W
SETUP