Pedal Problems; Other Problems - Kurzweil K2700 Musician's Manual

Troubleshooting

Pedal Problems

Pedal Problems
Before you consult this section, be sure to read
1-11.
Switch Pedal Problems
If you are having problems with connecting or using a switch pedal, check if one of the
following might be the issue:
• Sustain or Sostenuto is stuck "on." Be sure the pedal is plugged in before switching on
• The pedal is acting backwards ("on" when up instead of down). Power cycle the unit

Other Problems

If your problem is not covered in this chapter, or if none of the suggestions seem to work,
be sure to check Kurzweil's website for additional K2700 information that may have been
published since this manual was written: www.kurzweil.com.
If you still have problems, contact Kurzweil support in your country or at
www.kurzweil.com/support/. You may also find unofficial help at some of the internet
communities listed at www.kurzweil.com/community/.
Service Centers
To contact the nearest Kurzweil service representative, see
on page iv
Restoring Factory Defaults
For restoring your K2700 back to the factory defaults, see
10-6
the power. Turn power off, then on, if necessary.
making sure to NOT press on the pedal during startup.
in the front of this manual for contact information.
SW1 (SUSTAIN) and SW2 Jacks on page
Kurzweil International Contacts
RESET Page on page 9-39