Splitting In Program Mode - Kurzweil KME61 Musician's Manual

Hide thumbs Also See for KME61:

Table of Contents

Chapter 8

Tutorial

Splitting in Program mode

When you need two sounds on different parts of the keyboard, splitting comes in handy. For

example, if you want to play a flute melody part with your right hand while playing a piano

accompaniment part with your left hand. Layering is playing two sounds on the same part of the

keyboard and splitting is playing two sounds on different parts of the keyboard.

Creating New Sounds with Layering and Splitting

We are going to create a sound which combines guitar sound in the upper register and bass

sound in the lower register of the keyboard.

In Program mode, select n50 ( Chorus Guitar )

Press [Layer] button located on the left side of the display. This will change the LED on

[Program] button from red to amber and "L50" will appear on the display. The color

change of LED means that the SP2 is in Editing mode and "L26" indicates that program

number 50 is ( L )ayered.

８-4

< Figure 8‐7 >

< Figure 8‐8 >

Table of Contents