The Rear Panel; Power Button; Dc Power Jack; Usb Drive Port - Kurzweil SP1 Musician's Manual

The Rear Panel

The Rear Panel

POWER Button

Press and hold the POWER button to power the SP1 on or off.

DC Power Jack

Plug the included power adaptor into the DC Power jack.

USB DRIVE Port

Use the USB DRIVE port to connect the SP1 to a USB hard drive in order to update the
software of the SP1.

USB COMPUTER Port

Use the USB COMPUTER port to connect the SP1 to a computer in order to do the
following:
• Use the SP1 as a MIDI controller to play software instruments on a computer.
• Use computer software to record and play MIDI songs using SP1 sounds.

MIDI IN and OUT Ports

Use the MIDI ports to communicate with other MIDI modules and controllers. The OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.
To use the SP1 as a MIDI controller for another sound module, use a MIDI cable to connect
the SP1's MIDI OUT port to the MIDI input port of the module that you want to control.
To control the SP1 using another MIDI controller, use a MIDI cable to connect the SP1's
MIDI IN port to the MIDI output port of the controller that you will be using.
6